technology C35

The connector C35 allow the link between the stiffeners and the joists C35. In lateral of the joist C35, it's making it easier fixation of peripheral finishes of descent profiles. You will be able to stare directly on a concrete slab in a height range of 2 to 10 mm.

The joist Connect C35 within a scope of 1 m between support. Its scope allow a distributed load going up to 500 kg /m² and can receive wood, composite or ceramic coverings. 

The joist Connect C35 within a scope of 1 m between support. Its scope allow a distributed load going up to 500 kg /m² and can receive wood, composite or ceramic coverings. 

The stiffener C35 cut to 320 mm allow to stabilize and rigidify your structure with a center distance of 400 mm for wooden coverings, composite and ceramic following the choise of the laying axis 

The stiffener C35 cut to 520 mm allow to stabilize and rigidify your structure with a center distance of 600 mm for ceramic tile coverings.

The junction fishplate Connect C35 allow fixation the joists between them by mechanical abutment using the stainless screws VRUSTH4.8x16. The central hole allow also a fixation directly in a concrete base ( pedestal or slab) with mechanical stud of diam 10 mm - Réf VGJM10x80

Wall flange to stare himself in a rigid support : concrete wall, hollow block ... We will adapt fixation tu support (anchor stud, chemical fixation). The Omega profile will come on the inside of wall flange and to stare with stainless screws  Réf. VRUSTH6.3x25